This application enables you to see the standard RMON statistics for your whole network segment. It can display the statistics both in detail, bar chart, and pie chart mode.

• Traffic matrix and chart (shows traffic between stations/hosts)
• Host table and chart (shows traffic by host)
• TCP/UDP port table and chart (shows activity by port)

Distribution
• MAC layer octet distribution
• TCP/UDP octet distribution
• Protocol octet distribution
• Packet size distribution
• Utilization Rates
• Total octet rate
• Broadcast octet rate
• Multicast octet rate
• Unicast octet rate
• ICMP octet rate
• TCP SYNC octet rate
• 64 bytes packet rate
• 65-127 bytes packet rate
• 128-255 bytes packet rate
• 256-511 bytes packet rate
• 512-1023 bytes packet rate
• 1024-1518 bytes packet rate
• Error rate
• CRC error packet rate
• Collision packet rate
• Underrun packet rate
• Alignment packet rate
• Overrun packet rate
• FTP octet rate
• Telnet octet rate
• SMTP/POP/IMAP octet rate
• HTTP(S) octet rate
• NNTP octet rate
• NetBIOS octet rate
• SNMP octet rate
• Captures packets from local and remote segments

Protocols
This application enables you to see which protocols are in use on you network enables the user to open a protocol and zoom down the protocol hierarchy. The protocols can be displayed in both tabular mode, bar chart mode, and pie chart mode. The protocols are also sorted so you can always see which ones are the most active on your network.

Applications
This application enables you to see which applications are in use on your network. An application is defined as the inner data portion carried by a protocol. The applications can be displayed in both tabular mode, bar chart mode, and pie chart mode, and are sorted so you can always see which ones are the most active on your network.

Host
This application enables you to see the traffic for each host on your network and which ones are the most active. You can see detailed statistics for each network interface card connected to the network segment and hosts sending or receiving traffic over your network. You can also see statistics for each application and protocol used by any of these hosts.

Conversations
This application enables you to see the traffic among the hosts on your network, and which ones are the most active. You can see detailed statistics for each conversation among hosts on your segment, as well as the traffic between hosts on your network and other external networks, including sites on the Internet. You can also see statistics for each application and protocol used in any of conversations on the network.

History
This application enables you to see trends as traffic is captured in real time and charted on a time line. You can select among several different sampling rates and history duration.

Reports
This application enables you to create reports for any of the entries and statistic in the probe, including the most active applications, hosts, and conversation for a given period of time.
     • which device generate most trafic
     • which application generate most trafic
     • which devices generate most trafic (conversetaion monitor)
     • most used protocol
     • which device lock network
     • which device generate erronious trafic
     • The most used 5/10/15/N application and the most used 5/10/15/N protocol.
     • 5/10/15/N MAC addresses and IPs which generate the most packet on         network.
     • 5/10/15/N MAC addresses and IPs which used bandwith and erroreous and         big packet.

Alarms
This application enables you to define alarms that can monitor any statistic for any entry in the probe. You can be notified when the traffic hits a certain level, as well as monitor the the statistics in true real time using a graphical line chart.

Events
This application enables you to define events that are triggered by the alarms defined in the alarms application. The events can be defined to log the alarm, send email, send an SNMP message to a legacy network management system, or even start a script or program (i.e. call your pager about an event).